物料在乳化机均质锅内通过锅内搅拌框上的聚四氟乙烯刮 板(刮板始终迎合锅体内壁，扫净挂壁粘料)，不断产生新界面， 再经过框式搅拌器及与其反向的搅拌叶，将物料剪断、压缩、折 叠，使其搅拌、混合而向下流往锅体下方的均质器处，再通过高 速旋转的转子与定子之间所产生的强力的剪断、冲击、乱流等过 程使物料在剪切缝中被切割，迅速破碎成200nm - 2μm的微 粒。物料微粒化、乳化、混合、调匀、分散等可于短时间内完 成。由于均质锅内处于真空状态，物料在搅拌过程中产生的气泡 被及时抽走。乳化机均质结束后升高锅盖，按下倾倒按钮开关可 使锅内物料排向锅外容器内(或者打开锅底阀及加压阀门直接排 料)。
Material in the homogenizing tank can be peeled off from the inner wall by the PTFE scraper fixed onto mixing agitator. The material is sheared, compressed, folded, stirred, mixed and flowed down to the homogenizer below the tank. And then flow through high speed rotating part of rotor and stator. The impact, turbulence and other processes cause the material to be cut in the shear seam and quickly broken into particles of 200 nm to 2 μ m.
